Mandik KFR-09GW/BP, User Manual

Page: 5 / 108

5
EN
INST
ALL
ATION M
ANU
AL FOR R
OOM AIR C
ONDITIONER
INSTALLATION MANUAL FOR
ROOM AIR CONDITIONER
(SPLIT WALL-MOUNTED TyPE)
INSTALLATION pRECAUTIONS
„ „
Please read this installation manual carefully before operat-
ing the unit to ensure correct installation
„ „ If the power cord is damaged, replacement work shall be
performed by authorised personnel only
„ „
Installation work must be performed in accordance with
the national wiring standards by authorised personnel only
„ „ Contact an authorized service technician for repair, mainte-
nance and installation of this unit
„ „
This appliance is not intended for use by persons(including
children) with reduced physical, sensory or mental capabili-
ties, or lack of experience and knowledge, unless they have
been given supervision or instruction concerning use of the
appliance by persons responsible for their safety
„ „ Children should be supervised to ensure that they do not
play with the appliance
„ „
All the pictures in the instructions are for explanation pur-
poses only The actual shape should prevail
„ „ The design and specifications are subject to change with-
out prior notice for product improvement Consult with the
sales agency or manufacturer for details
SAFETY pRECAUTIONS
„ „ Please read these safety precautions carefully before instal-
lation
„ „ Be sure to follow all the precautions below, they are all im-
portant for ensuring safety
WARNING
1) Install according to this installation instructions strictly If installation is defective, it will cause water leakage, electrical shock,or
fire
2) Use the included accessories parts and specified parts for installation otherwise, it will cause the set to fall, water leakage, elec-
trical shock ,or fire
3) Install at a strong and firm location which is able to withstand the set s weight If the strength is not enough or installation is not
properly done, the set will drop and cause injury
4) For electrical work, follow the local national wiring standard, regulation and this installation instructions An independent cir-
cuit and single outlet must be used If electrical circuit capacity is not enough or defect found in electrical work, it will cause
electrical shock ,or fire
5) Use the specified cable and connect tightly and clamp the cable so that no external force will be acted on the terminal If con-
nection or fixing is not perfect, it will cause heat-up or fire at the connection
6) Wiring routing must be properly arranged so that control board cover is fixed properly If control board cover is not fixed per-
fectly, it will overheat at connection point of terminal, fire or electrical shock
7) When carrying out piping connection, take care not to let air substances other than the specified refrigerant go into refrigera-
tion cycle Otherwise, it will cause lower capacity, abnormal high pressure in the refrigeration cycle, explosion and injury
8) Do not modify the length of the power supply cord or use of extension cord, and do not share the single outlet with other elec-
trical appliances Otherwise, it will cause fire or electrical shock
CAUTION
1) This equipment must be grounded and installed with ground leakage current breaker It may cause electrical shock if grounding
is not perfect
2) Do not install the unit at place where leakage of flammable gas may occur In case gas leaks and accumulates at surrounding of
the unit, it may cause fire
3) Carry out drainage piping as mentioned in installation instructions If drainage is not perfect, water may enter the room and
damage the furniture
WARNING
This symbol indicates the possibility of death or serious injury
CAUTION
This symbol indicates the possibility of injury or damage to property