Mandik KFR-09GW/BP, User Manual

Page: 7 / 108

7
EN
1 | INSTALLATION pLATE MOUNTING
2
| DRILL A HOLE IN THE WALL
NOTE:
The mounting wall is strong and solid enough to
prevent it from the vibration.
Installation plate Mounting
1 Fit the installation plate horizontally on
structural parts of the wall with spaces
around the installation plate
2 If the wall is made of brick, concrete or the
like, drill five or eight 5mm diameter holes in
the wall Insert Clip anchor for appropriate
mounting screws
3 Fit the installation plate on the wall with five
or eight type A screws
NOTE:
Mount the Installation Plate and drill holes in
the wall according to the wall structure and cor-
responding mounting points on the installation
plate. The installation plate provided with the ma-
chine differ from appliance to appliance.
(Dimensions are in mm unless otherwise stated)
1 Determine hole positions according to left and right side of the instal-
lation plate The hole center is obtained by measuring the distance as
shown in the diagram above
2 Dirll the piping plate hole with 65 mm hole-core drill
3 Drill the piping hole at either the right or the left and the hole should be
slightly slanted to the outdoor side
4 Always take steps to protect the pipe when drilling metal grid,metal
plate or the like
150 mm or more to ceiling
150 mm or more to ceiling
150 mm or more to ceiling
Indoor
Outdoor
Wall
5-7 mm
Indoor unit outline
Indoor unit outline
Indoor unit outline
120 mm or
more to wall
120 mm or
more to wall
120 mm or
more to wall
120 mm or
more to wall
120 mm or
more to wall
120 mm or
more to wall
Left rear side
refrigerant pipe
hole ø 65
Left rear side
refrigerant pipe
hole ø 65
Left rear side
refrigerant pipe
hole ø 65
Right rear side
refrigerant
pipe hole ø 65
Right rear side
refrigerant
pipe hole ø 65
Right rear side
refrigerant
pipe hole ø 65
85
100
110
715
800
940
Model A
Model B
Model C
88
95
100
250
275
275
150 mm or more to ceiling
Indoor unit outline
Installation plate
120 mm or
more to wall
120 mm or
more to wall
Left rear side
refrigerant pipe
hole ø 65
Right rear side
refrigerant
pipe hole ø 65
293
940
Model D
163
315
45
Correct orientation
of Installation Plate
INDOOR UNIT
INST
ALL
ATION M
ANU
AL FOR R
OOM AIR C
ONDITIONER