Malvern Zetasizer Nano Series, User Manual

Page: 65 / 256

-
Hold the cell near the top, away from the lower measurement area, and push
into the cell holder until it stops. The cell can be inserted either way round.
. Close the cell area lid.
Inserting the Universal ‘Dip’ cell
Insertion of the dip cell, with cuvette, into the cell holder is the same procedure as
above, but first the dip cell must be placed into the sample cuvette.
Place the dip cell fully into the cuvette. Some cells have opaque surfaces as well as
polished optical surfaces. Ensure the small
triangle at the top of the cell faces the
front of the instrument. Check that the sample does not overflow the cuvette
when the dip cell is fully inserted.
Holding the base of the dip cell cap and the top of the cuvette simultaneously,
push the cell into the cell holder until it stops - a ‘
stop ’ on the dip cell must rest
on the top of the cell holder.
C H A P T E R 4
Z e t a s i z e r N a n o S e r i e s
P a g e 4 . 1 3
Stop
Stop
ILL
6736