Malvern Zetasizer Nano Series, User Manual

Page: 232 / 256

.
Water = Class 3
.
Particulate = Class 3
.
Pressure = 200 ± 20 kPa g
%
Caution
Telephone socket specification
The telephone socket for the remote support should have a direct internet
connection.
Computer specification
The Zetasizer software can run on a network but it is not recommended as, with
any software, running other software at the same time may be detrimental to the
speed of the Zetasizer software.
Minimum
specification of PC Pentium PC 2GHz, 128MByte RAM, 80MByte free hard disk space,
1024 x 768 screen resolution, CD-ROM drive, One free USB port
Operating platforms Windows XP Professional (Service pack 1a or later)
Windows 2000 (Service pack 3 or later)
Laser Safety
The Zetasizer Nano series instruments are Class 1 laser products and as such,
require no special laser safety considerations during normal operation. However,
during installation and servicing (which must be performed by a qualified
Malvern representative), it is possible that the servicing engineer may be exposed
to class 3b or above laser radiation. It is therefore recommended that the
administrative controls recommendations of the laser safety regulations (IEC
60825-1(1993) +A1(1997)+A2(2001) are implemented.
A P P E N D I X C
Z e t a s i z e r N a n o S e r i e s
P a g e C . 4
M A N 0 3 1 7
It is important that the purge air line supply conforms to the above
specification. Failure to meet this specification may result in permanent
damage to the instrument and invalidation of the warranty.