SkyRaider DS10CTEC User Manual
March 17, 2019
SkyRaider DS10CTEC User Manual
Page 15
Start the
MallincamSky
software program by double-clicking on its
icon
.
You can determine if MallincamSky recognizes the camera (and thus the drivers)
by noticing the
SkyRaiderDS10CTECC
name in the
Camera List
Tab (see
Chapter
3
for detailed instructions). If by chance you are running the SkyRaiderDS10CTEC
on a USB 2.0 cable, you will see the name as:
SkyRaiderDS10CTECC (USB2.0).
Once the driver has been successfully loaded, you will see the name of the
SkyRaiderDS10CTEC Camera
in the
MallincamSky Camera List
on the upper left
of the Window. You can install more than one SkyRaider Camera to your
computer, but the software can only control one SkyRaider Camera at a time.
If you notice that the
SkyRaiderDS10CTEC
has a
(USB2.0)
behind it, then you are
either using a USB 2.0 port, or the distance is too great for the USB 3.0 cable, and
the system has entered USB 2.0 speeds. Remember USB 2.0 utilizes slower speeds
but gives you greater distances.
Hint
