Dashes and Video Screens—69
3-IN-1 EVENT SCREEN
Available as an option on some TXi models, the 3-in-1 Event Screen
is a combination touch and push button control. The display unit is a
multi-functional tool that provides GPS tracking and multi-media
functions. It also enables operators to view various engine parame-
ters and service codes.
Care and Maintenance
General maintenance is not required. However, a soft cloth can
be used for cleaning the unit face. Window cleaner or alcohol can
also be used to clean the glass portion of the display. Do not use
harsh or abrasive cleaners on the unit.
Navigation Features
All product features are easily accessible through quick access
keys and touch point commands.
Home Screen and Buttons
The following information is displayed:
• Actual speed
• RPM
• MPH/KPH
• Number of detectable satellites
• Type of satellite signal
• Zero Off GPS Speed Control switch
• Set speed increase/decrease touch points
• Pull out section for ski options
• Pop-up screen for slalom settings
GPS Information
Satellite Signals
The unit depends on satellite signals to enable the GPS. A mini-
mum of four satellites is required to get a fix or clear signal. Satel-
lite scenarios are described as follow:
Differential Satellite Fix:
A differential fix means that not only
does the GPS have enough satellite information to calculate a posi-
tion, but it also has information from ground-based reference sta-
tions. This is the most accurate type of fix. Accuracy can be as good
as 10 centimeters.
Non-differential Fix:
A non-differential fix means the GPS has
enough satellite information to calculate a position but not enough
information from the ground-based reference stations. Average ac-
curacy with this type of fix is usually 15 meters.
No Fix:
A no fix means the GPS cannot detect any satellites and
therefore doesn’t have enough information to calculate a position.
Three Event Information
The unit is named for the three events that can be monitored:
Slalom, Jump, and Trick.
Touch the right arrow and the screen will shift to show the follow-
ing Change Event options:
Slalom
When Slalom is chosen, the screen shifts again, and the following
appears:
When in Training mode, the Set Speed may be set to any value.
When in Tournament mode, the Set Speeds are predefined and
limited to the following values:
15.5
17.4
19.3
21.1
23.0
24.9
26.7 28.6 30.4 32.3 34.2 36.0
When in Tournament
mode, the buoy times will
be displayed while running
a course:
Slalom Settings
Select Slalom, then
touch the symbol in the
upper left corner of the
screen. The following will
appear:
Buzzer Volume
The buzzer volume ad-
justment compensates for
increased engine noise. As
the boat speed increases,
and therefore the noises
from the engine increase,
the volume of the buzzer
will increase proportion-
ately to the boat’s speed
between 0 and 25 mph
(40.2 km/h). No further in-
crease occurs at speeds above 25 mph (40.2 km/h). The buzzer emits
a sound when the set speed is reached and when reaching the buoys
at a course. Select
Buzzer Volume, and the following appears:
Select the volume for High and Low speed by utilizing the up and
down arrows. Touch
Back to return to the Slalom Settings screen.
