the map window to position the cursor. Touch the
Return button to
return the cursor to the current location and the +/- buttons to zoom
in/out.
Bearing
Touch the
North/Bearing/Compass button to change the method
of tracking position. North is always pointing to the top of the screen
and in the direction the boat is traveling when
Bearing is selected.
Waypoints
Touch the
Waypoint button to place a waypoint at the cursor po-
68—Dashes and Video Screens
sition. Choose a waypoint icon to mark the waypoint with a mean-
ingful reminder. Position the cursor over the waypoint to edit move
or delete it.
Course
Touch the
Course button to Select, New, Stop, or Cancel a course.
Select
Touch
Select and then select a Course. Once a
course is highlighted, the driver can select
Pick, Unpick, or De-
lete. Picking a course will display the course on the map. Multiple
courses can be displayed on the map.
New
Touch
New Course to plot out a course that can be plotted out to
save and recall later. Touch
New Auto Course to record your route as
you go to save and recall later.
Stop
Touch
Stop to stop the current loaded course. A course cannot be
changed or edited after it is created.
Engine Start Code
The driver will be prompted to enter an
Engine Start Code
each time the power button is pressed on or the ignition key is cy-
cled. The code can be changed, or the prompt can be disabled, or if
the code prompt is disabled, the blower will turn on for four minutes
in preparation of the engine starting.
To change the start code, touch the
Change button and enter the
current code followed by the new code.
To disable the prompt, touch the
Disable button and enter the cur-
rent code.
To reenable the start code prompt, go into the settings menu and
select
Show Engine Code. From that menu, select the Show button.
Night Mode
The
Night Mode button toggles lighting brightness between Night
and Daytime. Adjust preferences in the
Setup Menu. The lighting of
the
Displays, Start/Stop Button, Power Button, and Joystick Control
dim to the value selected in the
Settings menu.
