BACKLIGHTING
Touch
Backlighting allows the
driver to adjust the brightness
of the 12” display, 7” display, and
dash LEDs from 1 to 100%. There
are two modes for the system
backlighting:
Automatic and Man-
ual.
In the
Automatic mode, the
system utilizes a light sensor to
determine the time of day and ad-
justs the brightness as follows:
Day—100%; Dawn/Dusk—60%; Night—5%
.
In
Manual mode, the driver is able to set the brightness for Day
and
Night Mode. The Night mode button is found in the upper right
corner of the 12” display screen.
Dashes and Video Screens—61
LANGUAGE
The
Language screen allows the user to switch between four (4)
lanuages:
English, French, Spanish and German. If a Factory Reset is
initiated, the language will revert to
English.
APPEARANCE
The
Appearance screen allows the user to customize the look
and feel of the display. There are five (5) skins to choose from. These
skins will change the color of the trim rings on the 12” and 7” display
screens, and also the pointers on the 12” display screen.
CONFIGURATION
Units
Touch
Units to choose from
English to Metric units.
Depth Alarm
Touch
Depth Alarm to adjust
the
Shallow Depth Alarm setting.
Temperature Offset
Touch
Temp Offset to adjust
the displayed air and water tem-
peratures to match an actual
temperature reading.
Time Zone
Choose from all time zones,
and turn ON/OFF
Daylight Sav-
ings Time.
Speed/Throttle
Touch
Throttle to change the throttle sensitivity from Standard to
Aggressive. Set the Speed Source as GPS or Paddlewheel.
Boat Model/Hull ID
Ability to enter the HIN and select the model of the boat.
Boat Options
Touch
Outputs to ENABLE/DISABLE on-screen touch control but-
tons for optional equipment. When enabled, the buttons will appear
on the screen.
Power Wedge/Surf Gates
Touch
Power Wedge to access options for the Power Wedge and
Surf Gates. Toggle
Auto Wedge, a feature that automatically moves
the Power Wedge from the selected position to a position of lowest
drag when the boat slows, and returns when
Set Speed resumes.
Toggle the
Light Signal for the visual indication during a Surf
transfer. Select the volume level for the
Audible Surf tones. Perform
a
Surf Gate Service.
Radio Configuration
Touch
Radio Configuration to set the Radio Region and to adjust
the volume of the
Surf Tone through the tower speakers.
DIAGNOSTICS
Engine Diagnostics
Touch
Engine Diag to view on-screen engine diagnostic information.
System Diagnostics
Touch
System Diag to view on-screen system diagnostic informa-
tion concerning boat sensors and GPS signal.
RGB Lighting
Touch the
RGB Lighting button, located in the System Diagnostics
screen, to view lighting system hardware and status information.
Rudder Calibration
Touch the
Rudder Cal button, located in the System Diagnostics
screen, to calibrate the rudder position sensor. The boat needs to be
moving less than 5.0 mph/8.1 kph with the engine OFF, in order for
the calibration to function. Follow the on-screen directions.
