• Time
The Time is based on the Zero-Off GPS Puck installed into
the vessel.
• Water Temperature
Water Temperature is read from the paddlewheel.
• Air Temperature
Air Temperature is read from a temperature sensor on the
dash harness.
• Engine Coolant Temperature
• Engine Oil Pressure
• Engine Battery Voltage
• Fuel Level
Fuel Level is read from the level sender in the fuel tank.
Note that movement of the boat can affect the reading, especially as
the fuel level decreases. Be certain to read the
Fueling information
in the
Get Ready section of this manual before operating the boat for
important information.
66—Dashes and Video Screens
Controls Screen
The Controls screen allows the driver to turn on and off the vari-
ous lights and options installed on the vessel.
• Blower
• Bilge Pumps
• Interior Lights
• Storage Lights
• Navigation Lights
• Anchor Light
• Docking Lights
• Swim Lights
• Seat Heater
• Heater
If the buttons for any equipment is not shown, touch
Settings and
verify that the output is active.
Setting Screen
Touch the
Settings button on the controls page to manage system
settings, options, troubleshooting, and software updates here. View
the available settings list with the scroll bar on the right side of
the screen and touch and item on the list to view available settings
choices. Touch the
red
X button to exit the setting screen. Changes
will automatically be saved upon leaving the
Settings screen.
Malibu Bluetooth
Touch
Malibu Bluetooth to enable
Bluetooth and pairing with the Perfect-Pull
App, and to edit the name of the Blue-
tooth name of the boat.
When pairing a device to the boat, the
default Bluetooth name is “Malibu Boat.”
There is a list of the devices that are
paired to the vessel.
You can
Favorite, Disconnect, or Forget a Paired Device.
About (Update)
Touch
About (Update) to view the
installed software version and instruc-
tions for how to install a software up-
date here.
Backlighting
Touch
Backlighting to adjust the
Brightness setting from 0-100% of the
display in
Daytime and Night modes
with the slide bar controls. The
Night
button on the display toggles between
the two settings.
Speed/Throttle
Touch
Source to switch the Speed
Source between Paddlewheel and Zero-Off
GPS.
Touch
Throttle to change the throttle sensitivity from standard
to aggressive.
Touch
Calibration to change the paddlewheel calibration.
Calibration
Touch
Units to switch between
English and Metric.
Touch
Temp to change the Tem-
perature Offset.
Touch
Depth to change the Shallow
Alarm Setpoint. Setpoint set to 0 dis-
ables the Shallow Alarm.
Touch
Time Zone to set the time zone
and Daylight-Saving Time.
Accessory Outputs
Turn on and off the Accessory Outputs.
• Heater
• Seat Heater
• Backup Camera
• Auto-Backup
Lighting Outputs
Turn on and off the Lighting Outputs.
• Forward Tower Lights
• Docking Lights
• Swim Lights
Engine Diagnostics
Touch
Engine Diag to view onscreen
engine diagnostic information.
