0.07
11
F12R L.C. 50 cc.
Checking Switches
B
Chapter
ISSUe
paGe
F. 1
cHEcKING SWITcHES
cHEcKING PROcEdURES
- Using a
Tester (code n°08609500)
, check switches. In particular, check continuity between terminals to
make sure they are correctly connected.
- replace the switch, even if only one of the possible combinations does not give the requested result.
Set the tester to function
Ω
.
F.
cONNEcTION OF SWITcHES dEScRIBEd IN THIS maNUaL
- this manual contains connection diagrams, like the one illustrated hereby, which illustrate how switch
terminals should be connected (key switch, brake switch, “Mode” button, etc.).
- The first column from the left indicates the different positions of the switch, the top line the colour of the
wires connected to the switch terminals.
- the “
”
symbol identifies terminals in which there is a condition of continuity, i.e. a closed circuit, in a
certain position of the switch.
- In this diagram:
- “B/R”
and
“N”
there is continuous contact when the switch is “
ON”.
