0.07
31
F12R L.C. 50 cc.
Signalling System
B
Chapter
ISSUe
paGe
3. Grounding of horn
- Disconnect black cable from terminal of horn.
- Connect a bridge cable
(1)
between
terminal
(2)
and grounding point of chassis
(3)
.
- turn key
“ON”.
- press
Horn
button to activate horn.
- compliant:
resume connection between black cable and chassis grounding.
See “Wiring Diagram”.
- Not compliant:
replace horn.
IIf stop light is not working, check:
1) CONtINUItY OF a FUSe
) CONtINUItY OF LIGht BULB aND reLatIVe COUpLING
3) FrONt aND rear BraKe SWItCh
4) VOLtaGe DeLIVereD tO LIGht BULB COUpLING
1. continuity of 5a fuse
- remove fuse.
- Connect
Tester (
Ω
)
to fuse.
- Check continuity of fuse.
- Not compliant:
replace fuse
- NOTE: if 5A fuse is not compliant, the flashlight will not be working.
2.
F. 33
AR
N
+
3
1
2
F. 34
Tester (
Ω
)
