Malaguti F12R AIR 50 cc. - Euro 2, Workshop Manual

Page: 39 / 46

0.07 39
F12R L.C. 50 cc. Signalling System
B
Chapter
ISSUe paGe
If the mixture oil signal is not correct, check:
1) OIL prOBe
) VOLtaGe LeVeL CheCK
1. Oil probe
- Detach connector of oil probe and take it out of tank.
- Connect Tester ( Ω ) to connector, as follows:
- terminal (+) of tester Coupling (1) .
- terminal (-) of tester Coupling (2) .
- Check continuity of float (a). In there is continuity, the float will move freely and position itself at the base
of the probe.
- Not compliant: replace oil probe.
F. 47
2. check voltage level
- Connect Tester (20 V dc) to connector (system side) , as follows:
- terminal (+) of tester Blue cable (1) .
- terminal (-) of tester Chassis grounding (2) .
- turn key “ON”.
- Voltage delivered to oil probe: > 12 V.
- compliant: white/purple cable interrupted between probe and digital instrument (PIN 8) . repair.
See “Wiring Diagram”.
- Not compliant: blue cable interrupted. repair.
See “Wiring Diagram”.
Tester ( Ω )
1
2
Tester (dc 20 V)
1
B/VL
2
F. 48
a
BL