Malaguti F12R AIR 50 cc. - Euro 2, Workshop Manual

Page: 15 / 46

0.07 1
F12R L.C. 50 cc. Starting System
B
Chapter
ISSUe paGe
3. Resistance of “cdI” control unit (red)
- Connect tester (2k Ω ) to “CDI”, as follows:
- terminal (+) of tester hV screw ( V ).
- terminal (-) of tester PIN 1 (GNd) .
- resistance: 525 ÷ 640 Ω at 20°c (F.7a) .
- terminal (+) of tester PIN 1 (GNd) .
- terminal (-) of tester PIN 2 (PIcK-UP) .
- resistance: 335 ÷ 385 Ω at 20°c (F.7b) .
- Not compliant: replace “CDI” control unit (code n° 0411000).
4. Stator pick-up resistance
- remove two-way connector of wiring.
- Connect Tester ( Ω ) to connector of flywheel magneto (V) .
- terminal (+) of tester red cable (1) .
- terminal (-) of tester Ground (2) .
- Stator pick-up resistance: 195 ÷ 205 Ω at 20°c.
- Not compliant: replace stator.
F. 7a
1
V
1
2
1
F. 7b
GL
R
F. 8
2
V
Tester (2k Ω ) Tester (2k Ω )
Tester ( Ω )