20
03/09
125 - 160 cc
Blog
Blog
Blog
Blog
Blog
F. 25
B
A
1
2
3
4
KEY SWITCH
Ignition inhibited (extractable key)
Preset starting position (non extractable key)
Steering lock insert (Ignition inhibited: extracta-
ble key).
In case both of the equipped keys are lost the entire
locking kit must be replaced.
STARTING THE ENGINE
Before pushing the starter button to start the motor,
first pull the front or rear brake lever and keep it
pulled.
Do not start the engine in a closed ambient,
because the exhaust is highly toxic.
To not damage the injection system, never
operate the "START" button if the fuel tank
is empty, or turn the key switch to "ON".
If the engine does not start, release the star-
ter switch, wait a moment, and then press it
again. In order not to drain the battery, do not
operate the starter for more than 10 seconds
on each try. Do not rev the engine to its limit
when it is cold.
Start the engine with the headlights off.
HANDLEBAR CONTROLS
RIGHT CONTROLS
A)
light switch:
right= off
center= tail and dashboard lights
left= high/low beams
B)
Electric starter button
LEFT CONTROLS
1)
Horn button
2)
Turn signals switch.
3)
Turn signals shutoff switch
4)
Turn on lights:
high beam
low beam
Summary of Contents for Blog 126
