Malaguti Blog 126, Service Manual

Page: 57 / 79

57 03/09
125 - 160 cc
Blog Blog Blog Blog Blog
F. 128
HANDLEBAR
• Remove beforehand:
- Upper handlebar covers (page 27)
- Front shield (page 31).
- Brake pump (page 56).
- Right switch and left switch (M).
- Counterweights (P).
- Handlebars (N)
- Cut the cable and tube holding ties.
- Remove the throttle cable (A)
• Loosen the nuts (D) and slide the pin off (H), taking care not to damage the cables
and tubes.
• Slide off the grips.
D
50 ± 20%
FORK
NOTE - When removing the fork leg, as well as the full fork, the
following should be removed beforehand:
- Front wheel (page 54)
- Front mudguard (page 55)
- Front brake calliper (page 55) (only for the left stem).
For the full fork , also remove the:
- Front shield (page 31)
- Handlebar
• To check the oil level and to change oil , see page 18.
FORK LEG
• Loosen the screws (V2)
• Raise the fork leg a few millimetres (A) and
tighten only the lower screw.
• Unscrew the cap (B) and undo the lower
screw.
• Slide out the fork leg (A) downwards.
V
2
30 ± 20%
D
P N M
P
N
L
M
D
H
A
F. 129
V
2
B
A