Malaguti Blog 126, Service Manual

Page: 62 / 79

62 03/09
125 - 160 cc
Blog Blog Blog Blog Blog
REAR
WHEEL
• Position the motorcycle on the
stand and place a suitable sup-
port under the engine.
• Remove beforehand:
- Muffler (page 58)
- Rear mudguard (page 61)
- Rear brake calliper (page 61)
• Unscrew the lower screws (V)
of the right shock absorber. Ro-
tate and anchor the shock ab-
sorber up high.
• Unscrew the wheel nut (D).
• Unscrew the fixing screws (V2) of the slider arm (B).
• Extract the external spacer (A).
• Remove the slider arm (B).
• Slide off the wheel pin the internal spacer (C).
• Check the wear conditions of the oil seals (E- F) and replace it if necessary.
• Check the condition of the silent-block (G).
• A appropriate puller must be used for bearing (H) replacement operations, after ha-
ving removed the Seeger ring (l).
• Slide off the wheel with care, ensuring that the vehicle is stable.
F. 142
H
E
C
I
B
G F A
V
2
F. 141
F. 143
D
V
V
2
D
100 ± 20%
V
2
45 ± 15%
C