51
03/09
125 - 160 cc
Blog
Blog
Blog
Blog
Blog
FUEL TANK
F. 112
V
4
C
D
E
A
M
I
Do not smoke or use open flames,
while operating on the fuel tank.
• During the operation, screw the tank cap
(A), to avoid that any foreign matter falls
inside.
• Disconnect the gas hose (C), pressing on
the fitting with one finger ( D). Keep a rag
close by to swab up any leaking fuel.
• Start the engine and let it run until the pipe
(C) is completely empty.
• Disconnect the connector (B).
• Cut the clamp (I).
• Disconnect the connector (L) inside the
sheaths (E).
• Unscrew the screws (V4), being careful not
to lose the anti-vibration pads, bushings
and clamp (M).
• When reassembling, put the clamp back
(M),
V
4
Remove the tank and place it far from heat sources and sparks and/or open flames.
L
B
V
4
5 ± 10%
Summary of Contents for Blog 126
