Malaguti Blog 126, Service Manual

Page: 61 / 79

61 03/09
125 - 160 cc
Blog Blog
Blog Blog
Blog
REAR
MUDGUARD
Right side
• V2.
Left side
• V.
V
2
3,5 ± 20%
V
3,5 ± 20%
V
F. 139
F. 140
REAR BRAKE CALIPER
Remove rear wheel beforehand as follows: unscrew the screws (V4) fixing the wheel to the hub, then
move the rear wheel until it hits the slider arm (B).
• Place an appropriate drain pan under the brake calliper.
• Unscrew the hydraulic fitting (R).
Empty out the hydraulic circuit, pouring the fluid in a special container for disposal in accordance
with specific waste disposal laws.
• Unscrew the screws (V2) and remove the caliper, taking care not to damage the rim previously removed
from the hub.
Brake fluid is corrosive and can cause personal injury.
Remove the calliper, taking care that fluid line does not get damaged and the disc and pads
do not get dirty. When the removal and replacement operations are finished, check that there
are no losses, dry up any traces of fluid and bleed the system as indicated in page 16.
R
20 ± 10%
During reassembly, change the gaskets.
V
2
30 ± 20%
V
2
R
V
2
F. 138
V
4
B