Maktec 25MKP, Operating And Using Manual, Page: 6 / 28

6
2.GENERAL FEATURES
-
25.000 (29 kw) – 40.000 kcal/h (48 kw) – 60.000 kcal/h (72 kw) capacity
-
Effortless and highly efficient automatic operation with fully automatic ignition and
pellet loading feature.
-
High efficient heating with 6-8 mm diameter pellets
-
Adjusting and monitoring the temprature of warming water in the system with digital
display.
-
Electronic remote control.
-
Safe use against overheating with safety thermostat.
-
Special case design provides energy saving.
-
The combustion air from the peripheral surfaces of combustion chamber provides
homogenous burning of the fuel.
-
Nutshells can also be used as a fuel with special fuel loading settings.
-
Ability to monitor loading and standby times from the electronic control panel by
adjusting from the digital display
-
The erosion caused by heating has been minimized with the chromium combustion
chamber.
-
Extremely quiet operation with cycle control and flap fan ensures maximum
efficiency
-
Ashes are poured into the ash drawer with the automatic loading feature.
-
Energy saving is provided by desired flow circulation with wet rotor, 3
speed circulation pump.
-
When the fuel in the fuel loading reservoir is completely used up and the system
temperature drops below 25 degrees, the unit switches itself off automatically to stop
unnecessary operation of the fan, pump and loading engine.
-
With its special combustion chamber design, it uses the heat from the fuel at the
highest level, hence the boiler efficiency increases.
-
2 years warranty, wide service network