4
1.SAFETY PRECAUTIONS
Symbol Key
This sign indicates the risk of personal injury, which
may be fatal, if the warnings are not followed.
This sign indicates the situations that may cause harm to the
environment, property and animals if the warnings are not
followed.
Protect the power cable from damages and contact with liquids.
The risk of electric shock occurs as a result of contact with
damaged cables.
Cables in contact with liquid may cause electric shock and fire.
Make sure that there is proper grounding in the installation
where the energy connection is made.
Use proper cross-section
cables for all electrical connections.
Risk of electric shock where grounding is insufficient.
Risk of
fire occurs due to overheating of low-section cables.
Never open the cover while the boiler is operating.
Danger
of personal injury as result of the flame coming out of the
combustion chamber
.
Do not remove the outer cover sheets of the boiler, do not
open the protective covers.
Risk of burning as a result of
contact to hot surfaces and risk of electric shock resulting
from contact with electrical components.
Do not disconnect the boiler from the place where it was
mounted, do not interrupt its connections.
During the
disconnecting process, there is a risk of electric shock
resulting from contact with electrical components and water
flood risk resulting from disconnection of water installation.
For safety i
t is strictly forbidden to install the boiler in
enclosed spaces inhabited with people.
The area where the
boiler is installed should be well ventilated and must have
constant fresh air intake.
Do not perform any cleaning or maintenance without
turning the unit off and disconnecting the power supply.
Risk of electric shock as a result of contact with electrical
components.
Summary of Contents for 25MKP
