6
ELECTRONIC SYSTEM UNIT
1.
GROUND:
The key that allows switching to Ground Setting mode in LCD system
mode.
2.
SETUP:
The key that allows switching to the Settings Menu.
3.
DEPTH:
The key that enables the device to switch to diameter screen and carry out
depth analysis.
4.
ACCEPT:
The key that approves the related function and enable to switch to the
previous menu.
5.
“ – “ :
The minus key.
6.
“+”:
The plus key.
7.
SCAN:
A key that enables analyzing a target when pressed passing over it.
8.
RESET:
Resets all detector settings (Default Settings) in reference to recent settings
whenever resetting is done.
9.
ON/OFF Switch:
The switch that is used for selecting between device turn off
and system selection.
10.
LCD:
The section that presents data to the operator in LCD system.
Summary of Contents for JeoScan 2D system
Page 1: ......
Page 3: ...2 WARNING PLEASE DO NOT START ASSEMBLING OR USING BEFORE READING THE WARNINGS SECTION...
Page 24: ......
