background image

TEKNETICS

Comprehensive Operating Manual & Guide to Metal Detecting

Professional Metal Detector

Comprehensive

Operating Manual and

Guide to Metal Detecting

5-YEAR LIMITED WARRANTY

The T2 metal detector is warranted against defects in materi-
als and workmanship under normal use for five years from the
date of purchase to the original owner. 

Damage due to neglect, accidental damage, or misuse of this
product is not covered under this warranty. Decisions regard-
ing abuse or misuse of the detector are made solely at the dis-
cretion of the manufacturer. 

Proof of Purchase is required make a claim under this
warranty.

Liability under this Warranty is limited to replacing or repairing,
at our option, the metal detector returned, shipping cost pre-
paid to First Texas Products. Shipping cost to First Texas
Products is the responsibility of the consumer.

To return your detector for service, please first contact First
Texas for a Return Authorization (RA) Number. Reference the
RA number on your package and return the detector within 15
days of calling to:

First Texas Products L.P.
1465-H Henry Brennan Dr.

El Paso, TX 79936

Phone: 1-800-413-4131

Warranty coverage does not include the cost of transporting
the detector back to an owner who is located outside of the
United States of America.

TekneticsMANUAL.qx6  4/2/07  11:02 AM  Page 1

Summary of Contents for T2





































Reviews: