10
Checking Battery Charge Level:
The
device
switches
to
“Ground
Adjustment” section after it detects the
search coil. At the bottom of this section
there is an area that indicates battery status and the operator detects battery status by
referring to this area. If the battery is depleted or does not have adequate charge switch
off the device and charge the batteries installing the charger.
Adjustment of SOUND Level:
“SETUP” button is pressed for adjusting the level of sound of
the device in whatever mode is it in.
The current adjusted sound level is displayed as % on the
screen.
Select the “SOUND” mode by pressing “+” and “-“ keys as described above. After this
mode is selected press the “ACCEPT“ button, the sound indicator bar will turn from
yellow into green. Adjust the sound level by pressing “+” and “-“ keys and press
“ACCEPT” button. The green indicator bar turns back into yellow. Now the sound level is
adjusted as you desired and you can switch to the previous mode by pressing “SETUP”
button.
Adjusting LIGHT Level
:
“SETUP” button is pressed for adjusting the level of light of the device in whatever mode
is it in.The current adjusted light level is displayed as % on the screen.
Select the “LIGHT” mode by pressing “+” and “-“ keys as described above. After this
mode is selected press the “ACCEPT” button, the light indicator bar will turn from yellow
into green. Adjust the light level by pressing “+” and “-“ keys and press “ACCEPT” button.
The green indicator bar turns back into yellow. Now the light level is adjusted as you
desired and you can switch to the previous mode by pressing “SETUP” button.
Summary of Contents for JeoScan 2D system
Page 1: ......
Page 3: ...2 WARNING PLEASE DO NOT START ASSEMBLING OR USING BEFORE READING THE WARNINGS SECTION...
Page 24: ......
