Makro Detector JeoScan 2D system, User Manual

Page: 20 / 24

19
Getting and Analysis report by Analyzing the Target:
To get an analysis report by analyzing the detected
target during exploration:

Press the “RESET” button by removing the
search coil off the target after the target is
detected.

Press and hold the “SCAN” button when
passing over the target again slowly. At that
moment the device analyzes the target.

Release the “SCAN” button after you pass
overt the target.
After this operation the device presents the
“ANALYSIS REPORT” to the operator. Type of the
metal, magnitude of the target and the ratios of
other environmental effects are received.
Detection of Target Depth:
For detecting target depth during exploring:

Press the “DEPTH” key when in explore mode
after the target is detected.

First the dimensions of the target should be
determined in depth mode. This operation is
explained in detail with operator help menu.

To enter the help menu form a yellow frame
around the “HELP” window by using “+” and “-
“ keys.

Press the “ACCEPT” button after forming this
frame.

In this menu it is explained to the in detail
how to determine the dimensions of the
target.

To enter the determined width dimension
place the yellow frame on “Width” by using
“+” and “-“ keys. Press the “ACCEPT” button to
convert the yellow frame to green.