15
PERFORMING SEARCH WITH LCD SYSTEM
After “GROUND” setting is completed
“ACCEPT” button is pressed and switched to
Explore Mode.
Hold the search coil 8-15 cm above and parallel to the
ground. You can explore by moving the search coil slowly
with a right to left sweeping motion or by walking straight.
Try to detect a target by exploring this way.
When the device detects a metal or a cavity it
gives a sound alarm and interaction occur on
CAVITY, METAL, IRON and VALUABLE bars
according to the power of the signal. At the
same time the effect of the target can be
monitored on the graph above the bars. Metal
targets are indicated with upper projecting
lines and cavity targets are indicated with
lower projecting lines on this graph.
Ground effect that may be formed together
with the target is also displayed on the display.
This ground effect is indicated to the operator
as “CAVITY” or “METAL”
If the target is a CAVITY, there is a raise on the
“CAVITY” bar and decrease in the graph. The
intensity of the “CAVITY” bar is indicated as %
on top depending on the magnitude of the
effect of target.
Summary of Contents for JeoScan 2D system
Page 1: ......
Page 3: ...2 WARNING PLEASE DO NOT START ASSEMBLING OR USING BEFORE READING THE WARNINGS SECTION...
Page 24: ......