![background image](http://html.mh-extra.com/html/ibrid/mx6/mx6_getting-to-know_609341001.webp)
Getting to know your
The gas-monitoring screen
gives you important information about you unit’s
status
.
What your MX6 is telling you and what you should do about it.
No faults
When the gas-monitoring
display screen appears
without any service or alarm
indicators, the unit has no
faults and needs no service.
Use it.
Bump Due
,
Cal Due
,
ZERO
,
B F
, and
CAL
tell you that your unit is in need of
service
.
What your iBrid
™
MX6 is telling you
and what you
should do about it.
What your MX6 is telling you and what you should do about it.
Bump test overdue
The unit is requesting a bump
test (CO shown).
Dock it*.
Calibration overdue
The unit is requesting a
calibration (CO shown).
Dock it*.
Zero failure
One or more sensors has
failed a zero (H2S and LEL
shown here).
Dock it*.
If the message persists,
see your supervisor.
Bump test failure
One or more sensors has
failed bump test (CO and
LEL shown here); the unit is
requesting a calibration.
Dock it*.
Calibration failure
One or more sensors has
failed calibration (H2S and LEL
highlighted here).
Dock it*.
If the message persists,
see your supervisor.
*When an instrument is docked, the iNet DS and the DS2 docking
stations will automatically perform scheduled tasks. When needed,
tasks may be completed by qualified personnel who can operate the
docking station or perform them manually.
www.indsci.com