Strona
1
z
26
PPH MAKOT
ul. Przewóz 34/304
30-716 Kraków | Poland
537 872 522 (Sales Department)
602 260 992 (Technical Department)
(Sales Department)
(Technical Department)
1. DESCRIPTION.
The MCH-07 v. 2 controller is a universal, combined controller intended for use in milking
devices and milk tanks. This controller allows you to cool the milk contained in the tank
and to carry out the milk tanks and milking devices washing process.
The controller is characterized by flexibility in adapting it to various requirements. It is
fully programmable at the installation stage, and at the same time protected against
possible interference by the user in the settings.
The controller consists of two complex segments:
cooling segment,
washing segment,
however, it is not possible, even accidentally, to activate the washing process during
the cooling process. The washing segment is activated only when the cooling is switched
off.
The MCH-07 v. 2 controller has a waterproof casing (protection class IP65), adapted
for built-up. On request there is also a version with a flange for panel mounting (variant
MCH-07.f). Power as well as control inputs and outputs are led through glands placed on
the lower part of the casing, however, on request, a version with glands placed on the
back of the casing is provided, which allows the controller to be installed in such a way
that the wires are hidden (variant MCH-07.b).
In the set with the controller there is a temperature sensor. In version MCH-07T v. 2
an additional temperature sensor is connected, which controls the heating of the water
temperature during the washing process.
The temperature sensors are located in the rubber cover (protection class IP68), ending
with stainless steel sleeve. The controller signals the failure of the temperature sensor.
