background image

8 ENGLISH

MAINTENANCE

CAUTION:

 

Always be sure that the tool is 

switched off and the battery cartridge is removed 

before attempting to perform inspection or 

maintenance.

NOTICE:

 

Never use gasoline, benzine, thinner, 

alcohol or the like. Discoloration, deformation or 

cracks may result.

To maintain product SAFETY and RELIABILITY, 

repairs, any other maintenance or adjustment should 

be performed by Makita Authorized or Factory Service 

Centers, always using Makita replacement parts.

OPTIONAL 

ACCESSORIES

CAUTION:

 

These accessories or attachments 

are recommended for use with your Makita tool 

specified in this manual.

 The use of any other 

accessories or attachments might present a risk of 

injury to persons. Only use accessory or attachment 

for its stated purpose.

If you need any assistance for more details regard

-

ing these accessories, ask your local Makita Service 

Center.

• 

Recipro saw blades

• 

Makita genuine battery and charger

NOTE:

 Some items in the list may be included in the 

tool package as standard accessories. They may 

differ from country to country.

MAKITA LIMITED ONE YEAR 

WARRANTY

Warranty Policy

Every Makita tool is thoroughly inspected and tested 

before leaving the factory. It is warranted to be free of 

defects from workmanship and materials for the period 

of ONE YEAR from the date of original purchase. 

Should any trouble develop during this one year period, 

return the COMPLETE tool, freight prepaid, to one 

of Makita’s Factory or Authorized Service Centers. If 

inspection shows the trouble is caused by defective 

workmanship or material, Makita will repair (or at our 

option, replace) without charge.

This Warranty does not apply where:
• 

repairs have been made or attempted by others:

• 

repairs are required because of normal wear and 

tear:

• 

the tool has been abused, misused or improperly 

maintained:

• 

alterations have been made to the tool.

IN NO EVENT SHALL MAKITA BE LIABLE FOR ANY 

INDIRECT, INCIDENTAL OR CONSEQUENTIAL 

DAMAGES FROM THE SALE OR USE OF THE 

PRODUCT. THIS DISCLAIMER APPLIES BOTH 

DURING AND AFTER THE TERM OF THIS 

WARRANTY.

MAKITA DISCLAIMS LIABILITY FOR ANY IMPLIED 

WARRANTIES, INCLUDING IMPLIED WARRANTIES 

OF "MERCHANTABILITY" AND "FITNESS FOR A 

SPECIFIC PURPOSE," AFTER THE ONE YEAR TERM 

OF THIS WARRANTY.
This Warranty gives you specific legal rights, and you 

may also have other rights which vary from state to 

state. Some states do not allow the exclusion or lim

-

itation of incidental or consequential damages, so the 

above limitation or exclusion may not apply to you. 

Some states do not allow limitation on how long an 

implied warranty lasts, so the above limitation may not 

apply to you.

Summary of Contents for XRJ07





















Reviews: