Radio Shack 43-3704 Owner'S Manual Download

Page: 1 / 76

2004 RadioShack Corporation.

RadioShack and RadioShack.com are trademarks

used by RadioShack Corporation.

NERGY

TAR

and the E

NERGY

TAR

certification mark

are registered US marks.

DirectLink is a registered trademark of Uniden Corporation.

OWNER’S MANUAL

Please read before using this equipment.

5.8 GHz Dual-Handset Expandable

2-Line Cordless Telephone with

Digital Answerer

43-3704

IMPORTANT

If an icon appears at the end of a paragraph, go to the box on that page with the
corresponding icon for pertinent information.

— Warning

— Important

— Caution

— Note

Memo Recording —

lets you leave messages for

yourself or others in your home or office, or record your

phone conversations. (See “Voice memo” on page 66.)

Call Screening —

lets you listen as a caller leaves a

message. (See “Screening a call” on page 62.)

Speakerphone —

lets you conduct a hands-free

conversation using the handset.

Handset Remote Operation —

lets you listen to your

incoming messages from the handset. (See “Remote

Operation” on page 67.)

Message Aler

—

beeps when you have new incoming

message. (See “Setting the message alert” on page 60.)

Convenient Extension Placement —

lets you place

another handset in addition to the supplied, anywhere

you have an AC outlet, regardless of phone jack

location.

Call Waiting/Caller ID —

lets you answer a call even

when you’re on the phone and see who’s calling before

you answer.

2-line operation —

lets you have one handset talking

on Line 1 while another handset participate in a 3-way

conference on Line 2 (you must have a 2-line

subscription from your phone company).

Summary of Contents for 43-3704













































































Search results

Summary of Contents for 43-3704

Reviews:

Related manuals for 43-3704

Brands by name

Popular brands

Radio Shack 43-3704, Owner'S Manual

Search results

Summary of Contents for 43-3704

Reviews:

Related manuals for 43-3704

Brands by name

Popular brands