background image

©

 2002 RadioShack Corporation. 

All Rights Reserved.

RadioShack and RadioShack.com are trademarks used by 

RadioShack Corporation.

OWNER’S MANUAL

406

)*\

"

%QTFNGUU

"

2JQPG

YKVJ

"

6#&

43-3821

Toll-Saver — lets you avoid unnecessary charges when 
you call by long distance to check your messages. See 
“Using the Toll-Saver” on Page 24.

Long Battery Life — the supplied battery pack (when fully 
charged) provides about 7 hours of talk time or 14 days of 
standby time. See “Connecting, Charging and Replacing the 
Battery Pack” on Page 10.

20 Channels — automatically selects a clear channel when 
you make or answer a call. You can also manually change 
channels during a call. See “Selecting the Channel” on 
Page 13.

Headset Jack — connects an optional headset (available 
at your local RadioShack store) for hands-free 
convenience. See “Using a Headset” on Page 14.

10 Number Memory Dialing — stores 10 numbers in memory 
for easy dialing. See “Memory Dialing” on Page 15.

Thank you for purchasing a RadioShack 2.4 GHz Cordless Telephone. Your 
telephone uses the 2.4 GHz band for less interference. Its headset jack lets you 
connect an optional handset for handsfree convenience.

The digital answering system provides clear reliable messaging with call screening, 
day/time stamp, call counter, remote access and instant skip or replay messaging. 

43-3821.fm  Page 1  Friday, May 10, 2002  10:08 AM

Summary of Contents for 43-3821





























Reviews: