2 ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model:
XFD15
Drilling capacities
Steel
13 mm (1/2")
Wood
Auger bit: 36 mm (1-7/16")
Self-feed bit: 35 mm (1-3/8”)
Hole saw: 51 mm (2”)
Fastening capacities
Wood screw
6 mm x 75 mm (1/4" x 2-15/16")
Machine screw
M6 (1/4")
No load speed (RPM)
High (2)
0 - 1,700 /min
Low (1)
0 - 500 /min
Overall length
150 mm (5-7/8")
Rated voltage
D.C. 18 V
Net weight
1.3 - 1.6 kg (2.9 - 3.5 lbs)
•
'XHWRRXUFRQWLQXLQJSURJUDPRIUHVHDUFKDQGGHYHORSPHQWWKHVSHFL¿FDWLRQVKHUHLQDUHVXEMHFWWRFKDQJHZLWKRXWQRWLFH
6SHFL¿FDWLRQVDQGEDWWHU\FDUWULGJHPD\GLႇHUIURPFRXQWU\WRFRXQWU\
7KHZHLJKWPD\GLႇHUGHSHQGLQJRQWKHDWWDFKPHQWVLQFOXGLQJWKHEDWWHU\FDUWULGJH7KHOLJKWHVWDQGKHDYL
-
est combinations, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
%DWWHU\FDUWULGJH
BL1815N / BL1820B / BL1830 / BL1830B / BL1840B / BL1850B / BL1860B
Charger
DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF / DC18SH
•
6RPHRIWKHEDWWHU\FDUWULGJHVDQGFKDUJHUVOLVWHGDERYHPD\QRWEHDYDLODEOHGHSHQGLQJRQ\RXUUHJLRQRIUHVLGHQFH
WARNING:
Only use the battery cartridges and chargers listed above.
8VHRIDQ\RWKHUEDWWHU\FDUWULGJHV
DQGFKDUJHUVPD\FDXVHLQMXU\DQGRU¿UH
SAFETY WARNINGS
General power tool safety warnings
WARNING:
Read all safety warnings, instruc-
WLRQVLOOXVWUDWLRQVDQGVSHFL¿FDWLRQVSURYLGHG
with this power tool.
Failure to follow all instructions
OLVWHGEHORZPD\UHVXOWLQHOHFWULFVKRFN¿UHDQGRU
VHULRXVLQMXU\
Save all warnings and instruc-
tions for future reference.
7KHWHUPSRZHUWRROLQWKHZDUQLQJVUHIHUVWR\RXU
PDLQVRSHUDWHGFRUGHGSRZHUWRRORUEDWWHU\RSHUDWHG
(cordless) power tool.
Work area safety
1.
Keep work area clean and well lit.
Cluttered or
dark areas invite accidents.
2.
Do not operate power tools in explosive atmo-
VSKHUHVVXFKDVLQWKHSUHVHQFHRIÀDPPDEOH
liquids, gases or dust.
Power tools create sparks
ZKLFKPD\LJQLWHWKHGXVWRUIXPHV
3.
Keep children and bystanders away while operating
a power tool.
'LVWUDFWLRQVFDQFDXVH\RXWRORVHFRQWURO
Electrical Safety
1.
Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools.
8QPRGL¿HGSOXJVDQGPDWFKLQJRXWOHWVZLOO
reduce risk of electric shock.
2.
Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators.
There is an increased risk of elec-
WULFVKRFNLI\RXUERG\LVHDUWKHGRUJURXQGHG
3.
Do not expose power tools to rain or wet con-
ditions.
Water entering a power tool will increase
the risk of electric shock.
4.
Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts.
Damaged or entangled cords
increase the risk of electric shock.
5.
When operating a power tool outdoors, use an
extension cord suitable for outdoor use.
Use of
a cord suitable for outdoor use reduces the risk of
electric shock.
6.
If operating a power tool in a damp location is
unavoidable, use a ground fault circuit inter-
rupter (GFCI) protected supply.
Use of a GFCI
reduces the risk of electric shock.