![background image](http://html.mh-extra.com/html/makita/maktec-mt813/maktec-mt813_technical-information_1722627008.webp)
W
iring diagram
P 8 / 9
[2] Wiring of Other Lead Wires When Choke Coils Are Used
*Connect lead wire from choke coil (purple)
with brush holder using insulated connector.
(See Fig. 12A below.)
Put in this position.
Bend the insulated connectors in the direction opposite to switch
as illustrated below.
Choke coil (orange)
Put in this position.
Choke coil (purple)
Rib F
Rib E
Lead wire of noise
suppressor (clear)
Route between
rib E and rib F.
Lead wire from choke coil
to brush holder (orange)
Route between rib E and rib F.
Brush holder
Boss A
Be careful not to pinch the following
lead wires between boss A and
handle cover:
*Lead wire of Brush holder (purple)
*Lead wire of Brush holder (orange)
Fig. 12A
Fig. 12
**Connect lead wire from choke coil (orange)
with brush holder using insulated connector.
(See Fig. 12A below.)
**Connector with brush holder
lead wire (orange) assembled
*Insulated connector with brush
holder lead wire (purple) assembled
Switch
The end of bent insulated connector
must not positioned over this line.