P 12/ 15
Unscrew 5.5x16 Hexalobular tapping screw and pull Grip shell half
slightly up and toward the screw hole side.
(
Fig. 32
)
Note
: When disassembling Throttle lever:
(1) Remove Sprocket guard, then remove two Compression
springs 12 and four
5.5x16 Hexalobular tapping screws on
A and B sides. (
Fig. 33
)
(2) Remove Starter complete, then remove
Compression spring 12
and two
5.5x16 Hexalobular tapping screws on C side.
(
Fig. 33
)
(3) Remove Hood, then remove
Compression spring 12,
Cup washer 6, M5x16 Hexalobular socket head bolt, and
5.5x16 Hexalobular tapping screw on D side. (
Fig. 33
)
(4) Remove four 5.5x16 Hexalobular tapping screws and Tubular
handle. (
Fig. 34
)
(5) Pull the sides of the grip portion of Tank assembly toward
outside slightly and swing up Throttle lever to remove Throttle
section from Tank assembly. (
Fig. 35
)
Note
: Be careful not to pull Tubes.
(1) Place Torsion spring 10 on Throttle lever, then turn Throttle
lever 180° and set them in place on the grip portion of Tank
assembly.
(2) Set Catch lever to the hinge position of Tank assembly.
(
Fig. 35
)
Note
: Torsion spring 10 has to be hooked with Throttle lever
as drawn in
Fig. 36
.
See
Fig. 33
and the explanation
.
Assemble four Compression springs 12 by reversing the disassembling procedure.
Note
: Be sure to set Cup washer 6 between Tubular handle and Compression spring 12 as drawn in D side in
Fig. 33
,
and then screw M5x16 Hexalobular socket head bolt to Cylinder 38.
Fig. 33
R
epair
DISASSEMBLY
DISASSEMBLING
ASSEMBLING
ASSEMBLY
[2] DISASSEMBLY/ ASSEMBLY
[2]-11. Tank assembly
Fig. 32
Fig. 34
Fig. 35
Fig. 36
Compression
spring 12
(4 pcs/ A,B,C,D)
5.5x16 Hexalobular
tapping screw (7 pcs.)
5.5x16 Hexalobular
tapping screw
5.5x16
Hexalobular
tapping screw
(4 pcs.)
Grip shell
Throttle lever
Throttle lever
Grip portion of Tank assembly
Grip portion
of Tank
assembly
Tubular handle
Hinge 1
Hinge 2
Catch lever
Grip shell
Throttle lever
Torsion spring 10
Torsion spring 10
Catch lever
M5x16 Hexalobular
socket head bolt
Cup washer 6
Tubular handle
A
B
C
D
Catch lever
[2]-12. Compression spring 12
Pull the hinges 1 and 2
(
Fig. 36
) of Tank assembly
toward outside carefully
and slightly.
