![background image](http://html.mh-extra.com/html/makita/dup361/dup361_instruction-manual_228143012.webp)
12 ENGLISH
Noise
The typical A-weighted noise level determined
according to EN50636-2-94:
Model DUP361
Sound pressure level (L
pA
) : 70 dB(A) or less
Uncertainty (K) : 3.2 dB(A)
Model DUP362
Sound pressure level (L
pA
) : 70 dB(A) or less
Uncertainty (K) : 1.4 dB(A)
The noise level under working may exceed 80 dB (A).
WARNING:
Wear ear protection.
Vibration
The
vibration
total
value
(tri-axial
vector
sum)
determined according to
EN50636-2-94:
Model DUP361
Vibration
emission
(a
h
) : 2.5 m/s
2
or less
Uncertainty (K) : 1.5 m/s
2
Model DUP362
Vibration
emission
(a
h
) : 2.5 m/s
2
or less
Uncertainty (K) : 1.5 m/s
2
NOTE:
The
declared
vibration
total
value(s)
has
been
measured in accordance with a standard
test method and
may
be
used
for
comparing one
tool
with
another.
NOTE:
The
declared
vibration
total
value(s)
may
also
be
used
in
a
preliminary assessment
of
exposure.
WARNING:
The vibration emission during
actual use of the power tool can differ from the
declared value(s) depending on the ways in which
the tool is used especially what kind of workpiece
is processed.
WARNING:
Be sure to identify safety
measures to protect the operator that are based
on an estimation of exposure in the actual
conditions of use (taking account of all parts of
the operating cycle such as the times when the
tool is switched off and when it is running idle in
addition to the trigger time).
EC Declaration of Conformity
For European countries only
The EC declaration of conformity is included as Annex
A to this instruction manual.
Pruning shears safety warnings
WARNING:
Read all safety warnings and
all instructions.
Failure to follow the warnings and
instructions may
result
in
electric
shock,
fire
and/or
serious
injury.
Save all warnings and
instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated
(corded)
power
tool
or
battery-operated
(cordless) power
tool.
1.
Use personal protective equipment. Always
wear eye protection.
Protective
equipment such
as a dust mask, non-
skid safety shoes, hard hat or hearing protection
used for appropriate conditions will
reduce
personal
injuries.
2.
Always wear protective goggles to protect
your eyes from injury when using power tools.
The goggles must comply with ANSI Z87.1 in
the USA, EN 166 in Europe, or AS/NZS 1336 in
Australia/New Zealand. In Australia/New
Zealand, it is legally required to wear a face
shield to protect your face, too.
It is an employer's responsibility to enforce the
use of appropriate safety protective
equipments by the tool operators and by other
persons in the immediate working area.
3.
Prevent unintentional starting. Ensure the
switch is in the off-position before connecting
to power source and/ or battery pack, picking
up or carrying the tool.
Carrying power tools
with
your
finger
on
the
switch
or
energising power tools that have the switch
on invites accidents.
4.
Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing, and gloves
away from moving parts.
Loose
clothes,
Summary of Contents for DUP361
