![background image](http://html.mh-extra.com/html/makita/dup361/dup361_instruction-manual_228143016.webp)
16 ENGLISH
the
lamps
on
the
switch
box
lights
up.
Overload protection
When the tool is operated in a manner that causes it to
draw
an
abnormally high
current,
the
tool
automatically
stops
without any indication. In this situation, turn the tool off
and stop the application that caused the tool to become
overloaded.
Then
turn
the
tool
on
to
restart.
Overheat protection
When the tool is overheated, the tool stops
automatically,
and
the
green
lamp
on
the
switch
box
blinks.
In
this
situation, let
the
tool
cool
down
before
turning
the
tool on again.
Overdischarge protection
When
the
battery
capacity
becomes
low,
the
tool
stops
automatically.
And
the
red
lamp
on
the
switch
box
lights
up
or
blinks.
If
the
product
does
not
operate
even
when
the
switches
are
operated, remove
the
batteries
from
the
battery
holder
and
charge
the
batteries.
Only for battery cartridges with the indicator
►
Fig.3:
1.
Indicator lamps
2.
Check
button
Press
the
check
button
on
the
battery
cartridge
to
indicate
the
remaining battery
capacity.
The
indicator
lamps
light up for a few seconds.
NOTE:
Depending on the conditions of use and the
ambient temperature,
the
indication may
differ
slightly
from the actual capacity.
Switch action
CAUTION:
Before connecting the battery to
the shears, always check to see that the switch
trigger actuates properly and returns to the “OFF”
position when released.
CAUTION:
When not operating the tool,
always make sure that the I/O switch is on the "O"
side.
CAUTION:
Do not press the I/O switch to the
“I” (on) position while pulling the switch trigger.
The
blade
closes
slightly
and
it
may
cause
personal
injury.
To turn on the tool, perform as follows:
1.
Connect
the
switch
box,
connection cord,
and
shears.
(Refer to “Installing the connection cord”.)
2.
Hold
the
shears
firmly,
and
press
the
I/O
switch
to
the “I” (on) position.
The green pilot lamp lights up.
Indicating the remaining battery
capacity
Auto locked-mode and shut-off
mode shift
Indicator lamps
Remaining
capacity
Lighted
Off
Blinking
% to 100%
75
% to 75%
50
25
% to 50%
% to 25%
0
Charge the
battery.
The
ba
may have
malfunctioned.
Summary of Contents for DUP361
