![background image](http://html.mh-extra.com/html/makita/dup361/dup361_instruction-manual_228143015.webp)
15 ENGLISH
a hot battery cartridge cool down before
charging it.
4.
Charge the battery cartridge if you do not use
it for a long period (more than six months).
* The shape may differ depending on the tool variation.
FUNCTIONAL
DESCRIPTION
CAUTION:
Always be sure that the tool is
switched off and the battery cartridge is removed
before adjusting or checking function on the tool.
Removing or installing battery
cartridge
CAUTION:
Always switch off the tool before
installing or removing of the battery cartridge.
CAUTION:
Hold the tool and the battery
cartridge firmly when installing or removing
battery cartridge.
Failure
to
hold
the
tool
and
the
battery
cartridge
firmly
may
cause
them
to
slip
off
your
hands
and
result
in
damage
to
the
tool
and
battery
cartridge
and
a
personal
injury.
►
Fig.2:
1.
Red indicator
2.
Button
3.
Battery
cartridge
4.
Battery holder
To
remove
the
battery
cartridge,
slide
it
from
the
tool
while
sliding
the
button
on
the
front
of
the
cartridge.
To
install
the
battery
cartridge,
align
the
tongue
on
the
battery
cartridge
with
the
groove
in
the
housing
and
slip
it into place. Insert it all the way until it locks in place
with a little click. If you can see the red indicator on the
upper
side
of
the
button,
it
is
not
locked
completely.
CAUTION:
Always install the battery cartridge
fully until the red indicator cannot be seen.
If not, it
may
accidentally
fall
out
of
the
tool,
causing
injury
to
you or
someone around you.
CAUTION:
Do not install the battery cartridge
forcibly.
If the cartridge does not slide in easily, it is
not
being
inserted
correctly.
NOTE:
The
tool
does
not
work
with
only
one
battery
cartridge.
Tool / battery protection system
The
tool
is
equipped with
a
tool/battery protection system. This system
automatically cuts off power to the motor
to
extend
tool
and
battery
life.
The
tool
will
automatically
stop
during
operation if
the
tool
or
battery
is placed under one
of the following conditions. In some conditions,
N Mark
The N Mark is a trademark or registered trademark of NFC
Formula, Inc. in USA and other countries in the world.
(This
tool
is
equipped with
an
NFC
receiver
only
for
a
service
purpose
used
by
authorized/factory
service
centers.)
PARTS DESCRIPTION
►
Fig.1
1
Harness *
2
Back pack
3
Switch
box
4
Pilot lamp (red)
5
Pilot lamp (green)
6
I/O switch
7
Holster
8
Cord holder
9
Connection cord
10
Shears
11
Switch trigger
-
-
Summary of Contents for DUP361
