![background image](http://html1.mh-extra.com/html/makita/dft087f/dft087f_repair-manual_4282914007.webp)
7 / 35
6-2-2
Assembling
1
Assemble Clutch assembly and Gear assembly. (
Fig. 14
2
Assemble Terminal unit [2] to Stator [1], then
tighten Flat head screws M3x6 [3] (3 pcs) with a
No.1 Phillips screwdriver.
Note
Be careful not to strip the head of Flat head screws
M3x6 [3] (3 pcs).
Connect Terminal unit [2] straight with care not to
deform the terminals [4] of Thermistor connection.
Fig. 15
3
Assemble Circuit board [2] to Stator [1], then
tighten Tapping screws PT 2x6 [3] (3 pcs) with a
No.1 Phillips screwdriver.
4
Assemble the electrical parts in accordance with
Circuit diagram and Wiring diagram.
Note
Be careful not to strip the head of Tapping screw PT
2x6 [3].
Fig. 16
5
Assemble the following parts to Housing R [1],
then fix Lead wires with 1R411.
Controller [2]
Terminal [3]
Buzzer circuit [4]
Switch [5]
LED circuit [6]
Sensor circuit [7]
F/R change lever [8]
Lens, LED circuit [9]
USB circuit [10]
Fig. 17
6
Assemble Rotor [2] and Gear assembly [3] to Stator
[1], then assemble them to Housing R [4].
Note
Assemble Rotor [2] to Stator [1] while putting Stator
[1] on a workbench, because the excessive pushing
Rotor [2] to Stator [1] may cause the break of Printed
circuit board.
[3]
[2]
[1]
[4]
[2]
[3]
[1]
[1]
[6]
[7] [8]
[9]
[3]
[2]
[4]
[5]
[10]
[1]
[2]
[3]
[4]