17 / 35
8-2
Electrical parts section
Fig.45
1
LED circuit A
8
Line filter
2
Sensor circuit
9
Connector (for LED circuit A, LED circuit B, Sensor circuit,
USB circuit and Buzzer circuit)
3
Stator
10 Connector with Tape
4
LED circuit B
11 Protrusion of Controller
5
USB circuit
12 Space A
6
Switch
13 Controller
7
Buzzer circuit
14 Connector (3-pin/No connection)
15 Fix the following Lead wires in this groove:
LED circuit A lead wires/LED circuit B lead wires/Sensor circuit lead wires/USB circuit lead wires/Lead wires for Stator
16 Be careful not to put Lead wires on/under Buzzer circuit.
17
Place Line filter, Connector (for LED circuit A, LED circuit B, Sensor circuit, USB circuit and Buzzer circuit) and Connector with Tape
in Space A.
18 Be careful not to put Lead wires under the protrusion of Controller.
19 Place Connector (3-pin/No connection) in Space A if there is no opening A in Housing L (See next page.).
1
2
7
8
3
4
9
10
5
6
12
14
11
13
15
16
17
18
19