P 13/ 24
R
epair
[4] DISASSEMBLY/ ASSEMBLY
[4]-3. Gear assembly
DISASSEMBLING
ASSEMBLING
(1) Move Connecting rod in advance until the hex end of Crank is aligned with
the hex hole in Gear assembly. (
Fig. 14
)
(2) Assemble Gear assembly to Crank case with four M4x12 Hex socket head bolt
so that the hex end of Crank fits into the hex hole in Gear assembly. (
Figs. 14
and 13
)
(3) Assemble Motor section to Gear assembly. Refer to
Fig. 12 of page 11
.
(4) Move the crank portion to the lower dead point, and install the module of
Motor housing and Main cylinder into Housing L. (
Fig. 15
)
After removing Motor housing set from Gear assembly as mentioned in
page 9,
remove four M4x12 Hex socket head bolts and Gear assembly from Crank case.
(
Fig. 13
)
Fig. 13
Fig. 14
Fig. 15
M4x12 Hex socket
head bolt (4 pcs.)
[0.88-1.8 N·m]
Gear assembly
Crank case
Hex end of Crank
Hex hole of
Gear assembly
Crank case
Connecting rod
Crank portion at
the lower dead point
Main cylinder
Gear assembly
Motor housing
Connecting rod
Housing L
