P 11/ 24
R
epair
[4] DISASSEMBLY/ ASSEMBLY
[4]-2. Armature (cont.)
1. Remove the end of Torsion springs of Brush holder complete from Carbon brushes and hook them in the notches of
metal brush holders, then disconnect Carbon brushes from Commutator by pulling them in the direction of the black
arrows.
Note
: Hold the coils of Torsion springs (designated by the white arrows) so as not to remove them from Brush
holder complete.
2. Pull out Armature together with Yoke unit from Brush holder complete.
See
Fig. 11
for the disassembly of Armature section.
Fig. 11
Carbon brush
Carbon brush
Brush holder complete
Brush holder complete
Armature
Notch of metal brush holder
Notch of metal brush holder
1
Yoke unit
DISASSEMBLING
2
2
3
