P 8/ 24
R
epair
[4] DISASSEMBLY/ ASSEMBLY
[4]-1. Magazine section (cont.)
ASSEMBLING
1. Insert two Compression springs 6 into the grooves of
Slide door.
2. Move Pusher so that the center hook of Pusher
comes over the groove end of Slide door.
3. Insert the center hook of Pusher into the groove end
of Slide door.
4. Insert the side hooks of Pusher into the slots of Sleeves
completely until the hooks stop.
Assemble Pusher section to Slide door. (
Fig. 8
)
Fig. 8
Compression spring 6
(2 pcs.)
Slide door
Slide door
Pusher
4mm height
(
Re: Fig. 6
)
Center hook of
Pusher
Center hook of
Pusher
Groove end
Groove end
Sleeve (2 pcs.)
Side hooks
