Instructions
WARNING
Please take necessary safety precautions when using any electric tool to reduce the risk of
fire, electric shock, and personal injury. This glue pen uses 120v electrical outlet and fits a
standard US outlet. Ensure plug is fully inserted into plug. If plug does not fit, do not alter
plug. Operate glue pen only as directed. Westcott
®
Mini Glue Sticks.
CAUTION
–
Do not touch heated nozzle or melted glue; temperatures can reach up to 400°F
or higher. Wear protective clothing, such as long sleeves, gloves, closed toe shoes, and safety
glasses when operating. For any accidental contact with melted glue: do not remove glue
from affected area; place burned area under cold running water.
Additional Safety Precautions
1. Do not leave unattended.
2. Keep away from children and pets.
3. Keep away from water and other sources of moisture.
4. Ensure working surfaces are clean, dry and debris free.
5. Once plugged in, glue pen is immediately heating up. Assume hot at all times.
6. Do not unplug by pulling on the glue pen or cord; grab by plug.
7. Do not use any foreign material in the glue pen.
8. Unplug and allow to cool before storage.
9. Do not operate if cord is damaged or frayed.
10. Save these instructions and warnings for future reference.
All Temp Glue Pen
Stylo à colle toute température
Bolígrafo de Pegamento para Toda
Temperatura
Model/Modèle/Modelo: 16761
Operating Instructions
1. For best results, use with Westcott
®
Mini Glue Sticks.
2. Items needed: Glue pen and two mini (7mm) glue sticks.
3. Insert the 1st glue stick into the rear of the glue pen until all the way forward.
4. Push 2nd glue stick into the glue pen until contact is made with the 1st glue stick.
5. Slide handle to rear position of glue pen.
6. Plug glue pen in.
7. Heat up the glue pen for 3-4 minutes to achieve working temperature.
8. Press the trigger button so the feeding mechanism will feed the melted glue out of
the glue pen.
9. Repeat steps 3-4 for general use.
Limited 2 Year Warranty
This product is warranted to be free from all defects in workmanship for the period
specified above. Damage due to abuse, misuse, normal wear, industrial use or neglect is
not covered. Defective products will be repaired, replaced or substituted with the same
products or one of equal value. Product should be returned to: Acme United Corporation,
Attention: Customer Service Department. Send dated cash register receipt, with explana-
tion of defect. You may have other rights which vary from state to state.
WARNING: DON’T PRESS THE TRIGGERING
BUTTON IF THE FEEDING KNOB IN REAR
POSITION WITHOUT GLUE STICK LOADED
MISE EN GARDE : NE PAS APPUYER SUR LE
BOUTON DE DÉCLENCHEMENT SI LE
BOUTON D’AVANCE EST EN POSITION
ARRIÈRE SANS QU’UN BÂTONNET DE
COLLE NE SOIT CHARGÉ
ADVERTENCIA: NO OPRIMA EL PULSADOR
SI EL BOTÓN DE ALIMENTACIÓN ESTÁ EN
POSICIÓN TRASERA Y NO SE HA INTRO-
DUCIDO LA BARRA DE PEGAMENTO
DISTRIBUTED BY / DISTRIBUÉ PAR / DISTRIBUIDO POR
ACME UNITED CORPORATION
55 WALLS DRIVE
| FAIRFIELD, CT 06824
WESTCOTT® IS A REGISTERED TRADEMARK OF
ACME UNITED CORPORATION.
WESTCOTT® EST UNE MARQUE DE COMMERCE
DÉPOSÉE DE ACME UNITED CORPORATION.
WESTCOTT® ES UNA MARCA COMERCIAL REGISTRADA
DE ACME UNITED CORPORATION.
©2017 ACME UNITED CORPORATION
MADE IN CHINA | FABRIQUÉ EN CHINE | HECHO EN CHINA
WWW.WESTCOTTBRAND.COM
