30
© 2017 Maka Technologies Group. All Rights Reserved
Getting
Started
Operation of your RX1 FHD Digital Roadcorder
TM
SETUP SETTNG
License Number
Set the Car number plate for video recording information of your own
vehicle for better assurance and reality on the video footage.
1 Press on twice to enter video setting
2 Press on
UP
or
DOWN
button to navigate to the function that shows
License Number
3 Press on
OK
to enter and show 8 slots for input (all in A default mode).
4. Press
UP / DOWN
button to make the selection and press
OK
to go to the
next slot which you will see an icon blue highlight at.
5. Repeat point 4 till the last entry (8
th
slot) was input follow by choosing if the
license number to be shown and stamp on the video clip follow and press
OK
to confirm exit to Setting (License Number will highlight in blue)
6 Press on once to exit Setting and back to recording mode
Date/
Time
Setup
Access the following settings to change the
device’s time and date.
If
the
battery
remains
fully discharged
or
removed
from
the
device,
the
time
and
date
is
reset.
1 Press on
twice to enter setup setting
2 Press on
DOWN
button to navigate to the function that shows the Date/Time
3 Press on
OK
to enter and in :
YYYY/MM/DD
HRS:MM:SS
