Maka Technologies Marbella RX1, User Manual, Page: 31 / 41

31
© 2017 Maka Technologies Group. All Rights Reserved
Getting Started
Operation of your RX1 FHD Digital Roadcorder TM
4 Press on the
UP or DOWN button to change the date and time accordingly.
5 Press on
OK
button to shift entry into the next segment. (eg. YYYY>MM)
6 Repeat step 4 and 5 to change accordingly until back to YYYY.
7 Press on to exit Setup Setting
Auto Power Off
This function enable you to select the auto shut down of the device if the unit is
not in the recording mode which help to alert driver.
1 Press on twice to enter Setup Setting
2 Press on UP or DOWN button to navigate to the function that shows Auto
Power Off
3 Press on
OK
to enter and show : OFF/ 1min/ 3min
4 Press on the UP or DOWN button to make your selection
5 Press on
OK
to confirm your entry
6 Press on to exit Setting
Screen Saver
Select timer duration for the LCD to turn off after recording starts.
1 Press on twice to enter Setup Setting
2 Press on UP or DOWN button to navigate to the function that shows Screen
Saver
3 Press on
OK
to enter and show : OFF/ 3min/ 5min/ 10min
4 Press on the UP or DOWN button to make your selection