![background image](http://html1.mh-extra.com/html/maka-technologies/marbella-rx1/marbella-rx1_user-manual_3786653033.webp)
33
© 2017 Maka Technologies Group. All Rights Reserved
Getting
Started
Operation of your RX1 FHD Digital Roadcorder
TM
Frequency
Please set according to the local power supply respectively; 50Hz or 60Hz.
1 Press on
twice to enter System Setting
2 Press on
UP
or
DOWN
button to navigate to the function that shows
FREQ.
3 Press on
OK
to enter and show :
50Hz/
60Hz
4 Press on the
UP
or
DOWN
button to make your selection
5 Press on
OK
to confirm your entry and exit Setting
6 Press on to exit Setup Setting
Restore
Factory
Setting (Default Setting)
Set the system parameters to the default value.
1 Press on
twice to enter Setup Setting
2 Press on
UP
or
DOWN
button to navigate to the function that shows
DEFAULT
SET
3 Press on
OK
to enter and show :
Cancel or OK
4 Press on the
UP
or
DOWN
button to make your selection
5 Press on
OK
to confirm your entry and exit Setting
6 Press on to exit Setup Setting
Version
Version of the device as shown should be : 20170406 V1.0 and above