4.3.2. Icons on LCD Display
Voltage is over 30V (AC or DC)
AC Voltage or Current
Warming
DC Voltage or Current
Flexible Coils
AC+DC Voltage or Current
Traditional Clamps
Continuity Function
Relative
Diode Function
High Edge Time
Ohms
Variable Frequency Driver
VFD Loz Low Impedance Mode
Inrush Current
4.4. Understanding the Rotary Switch
• Select a primary measurement function by positioning the rotary switch to
one of the icons around its perimeter.
• For each function, the Meter presents a standard display for that function
(range, measurement units, and modifiers).
• Button choices made in one function do not carry over into another
function.
DC and AC+DC Voltage Measurement
Low Impedance Mode AC voltage Measurement
Frequency and Duty Measurement
Resistance, Diode Test, Capacitance and Continuity Measurement
Temperature Measurement
AC and DC 60 Amps Clamp Current Measurement
AC and DC 600 Amps Clamp Current Measurement
AC and DC 1000 Amps Clamp Current Measurement
Flexible Coils Current
9
• Inrush Function
Note:
Only ACA functions can do the INRUSH value measurement.
1. Switch motor off and put the clamp meter on the motor.
2. Press the Peak/Inrush/ESC Button, “----”will appear in the display.
3. Switch motor on and then read the value on the display.
• ESC it goes back to a normal measuring mode.
3.3.2. Data Hold/Flashlight Button
• To freeze the LCD reading, press the
Data Hold/Flashlight
Button.
• While data hold is active, the HOLD
icon appears on the LCD, press the
Data Hold/Flashlight
Button again
to return to normal operation.
• Press and hold the Data
Hold/Flashlight Button for more than
1 second to turn the Flashlight on,
press again to turn the Flashlight off.
