59
Majestic • QUARTZ32, QUARTZ36, QUARTZ42 Installation Manual • 2412-980 Rev. Q • 3/19
Log Set Assembly: LOGS-QUARTZ32, LOGS-QUARTZ36
Models: QUARTZ32IN, QUARTZ32IL, QUARTZ36IN, QUARTZ36IL
LOG PLACEMENT
INSTRUCTIONS
Overview
These are common log instructions for the QUARTZ32
and QUARTZ36 models. Each model uses 8 logs, 6 logs
are common logs between the two sizes. Log position is
controlled by two log pins (installed on burner) and four
hand bend tabs located in the base pan.
*The photos shown in these instructions depict a QUARTZ36
model.
Figure 1. Log Pin and Glowing Ember Locations
CAUTION: Logs are fragile, handle with care.
Install Logs
Figure 2. Log Assembly Components - QUARTZ36 Shown
Figure 3. Hand Bend Tab Locations - QUARTZ36 Shown
HAND BEND TABS
1. Locate the four hand bend tab on the base pan and
bend each tab up to 90 degrees. See Figure 3.
LEFT REAR BASE LOG
RIGHT REAR BASE LOG
LEFT FRONT BASE LOG RIGHT FRONT BASE LOG
TOP LEFT LOG
MIDDLE LEFT
CROSS LOG
MIDDLE RIGHT
CROSS LOG
TOP RIGHT LOG
5
1
2
3
4
6
8
7
QUARTZ36
LOG PINS
EMBERS
QUARTZ32
EMBERS
EMBERS NOT ALLOWED
IN SHADED AREA
EMBERS NOT ALLOWED
IN SHADED AREA
Reference Figure 2 for log identification of logs. It is
important to lay the logs out in order as shown in Figure
2. Some logs are similar to others in shape or size so it
is imperative to correctly identify each log. The rear right
log (#2) and the front right log (#4) that rest on the burner
are different between the two sizes.
Log Identification: (QUARTZ32/QUARTZ36)
D. Install Logs (LOGS-QUARTZ32/LOGS-QUARTZ36)
