MAHA MPJ 16.5/750 1S FA, Original Operating Instructions

Page: 28 / 32

28
BA551601-en
8 Repairs
NOTICE
See repair instructions in the Technical Handbook for the Pit Jacks.
9 Decommissioning, Dismantling and Disposal
Decommissioning and dismantling of the equipment may be done only by
specially authorized and trained personnel provided by the manufacturer,
licensed dealers or service partners.
Pay attention to the product and safety data sheets of the lubricant used. Avoid
damage to the environment. Should a disposal of the device be necessary it
must be done in adherence with locally applicable legal regulations regarding
environmental protection. Remove all materials properly sorted out and bring
them to a suitable waste disposal service. Collect operating materials such as
grease, oils, coolant, solvent-based cleaning fluids etc. in suitable containers
and dispose of in an environmentally protective manner.
Alternatively, you may take the equipment to a specialised waste management
plant to ensure that all components and operating liquids are properly disposed
of.
10 Contents of the Declaration of Conformity
MAHA Maschinenbau Haldenwang GmbH & Co. KG
herewith declares as a manufacturer its sole responsibility to ensure that the
product named hereafter meets the safety and health regulations both in design
and construction required by the EC directives stated below.
This declaration becomes void if any change is made to the product that was
not discussed and approved by named company beforehand.
Model: MPJ 4.0/750 1S HM
MPJ 4.0/750 1S HA
MPJ 16.5/750 1S HM
MPJ 16.5/750 1S HA
MPJ 16.5/750 1S FA
MPJ 16.5/750 1S TA MPJ 20.0/750 1S HM
MPJ 20.0/750 1S HA
MPJ 20.0/750 1S FA
MPJ 20.0/750 1S TA
Designation: Pit Jack;
Rated Load Capacity 4000 / 16 500 / 20 000 kg
Directives: 2006/42/EC
Standards: DIN EN 1494:2009