instructions for
air operated jacks telescopic
model no’s:
thank you for purchasing a sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. safety
9
disconnect jack from air supply before changing parts, servicing or performing any maintenance.
WarNiNG!
ensure correct air pressure is maintained and not exceeded.
9
Keep air hose away from heat, oil and sharp edges. check air hose for wear before each use, and ensure that all connections are
secure.
9
ensure jack is kept clean and in good working order. repair or replace damaged parts immediately.
9
use recommended parts only. incorrect parts may be dangerous and will invalidate the warranty.
9
use a qualified person to lubricate and maintain the jack.
8
do Not
use brake fluid to top up system. use sealey hydraulic oil only.
9
locate jack in a suitable, well lit work area. Keep area clean and tidy and free from unrelated materials.
9
use jack on level & solid ground, preferably concrete. Avoid tarmacadam since jack may sink in.
9
Place chocks under wheels of vehicle.
9
ensure the vehicle handbrake is engaged (or in “PArK” mode), and switch the engine off.
9
ensure minimum distance of 0.5m between vehicle as it tilts & static objects such as doors, walls, etc.
9
ensure all non essential persons keep a safe distance and that there are no passengers in the vehicle to be jacked up.
9
Place jack under vehicle manufacturer’s recommended jacking points (see vehicle handbook).
9
check that the jacking point is stable and centred on the jack saddle and is free from grease or oil.
▲
daNGer:
use jack for lifting only, not for supporting the raised load. use correctly rated axle stands under vehicle before proceeding
with task.
8
do Not
apply your body weight to the handle during jacking.
9
the handle is only for moving the jack to and from the lifting location.
8
do Not
operate the jack if parts are missing or damaged.
8
do Not
exceed the rated capacity of the jack.
8
do Not
allow the vehicle to move during lifting.
8
do Not
jack a vehicle which may result in the spillage of fuel, battery acid, or dangerous substances.
8
do Not
work under the vehicle until axle stands have been positioned correctly.
8
do Not
use the jack for purposes other than those for which it is designed.
8
do Not
adjust the safety overload valve.
8
do Not
snatch the hose from the air supply, and do not direct air from the air hose at yourself or others.
9
ensure there are no persons or obstructions beneath the vehicle before lowering.
9
When not in use disconnect jack from the air supply, and store in the lowered position in a safe, dry, childproof area.
WarNiNG!
turn off air supply and de-pressurise the control nozzle before removing the pump unit from any installation or mobile
system.
9
failure to comply with this instruction may damage the unit and will invalidate your warranty.
Original Language Version
© Jack sealey limited
refer to
instructions
Wear protective
gloves
Wear safety
footwear
YAJ301.V2, YAJ10-25lr, YAJ15-30le, YAJ20-60lr, YAJ10-40lelr.V2| issue 1 01/09/17
yaj301.V2, yaj10-25lr, yaj15-30le,yaj20-60lr, yaj10-40lelr.V2
