background image

28

1

HYDRAULIC  

TROLLEY JACK

User 

Manual

 

AFTER SALES SUPPORT

02/2019

97361

MODEL:

 

FLX-WH-01

00800 78747874
00800 78747874

[email protected]
[email protected]

GB

IE

GB

IE

PRODUCED IN CHINA FOR: 

ALDI STORES LTD. PO BOX 26, ATHERSTONE

WARWICKSHIRE, CV92SH.

ALDI STORES (IRELAND) LTD. 

PO BOX 726, NAAS, CO. KILDARE.

Visit us at www.aldi.com

Great care has gone into the manufacture of this product and it should

therefore provide you with years of good service when used properly. In

the event of product failure within its intended use over the course of the

first 3 years after date of purchase, we will remedy the problem as quickly

as possible once it has been brought to our attention. In the unlikely event

of such an occurrence, or if you require any information about the product,

please contact us via our helpline support services, details of which are to be

found both in this manual and on the product itself.

Contents

 

Overview ..................................................................................................................4
Use ............................................................................................................................5
Total content /parts .................................................................................................6
General information ................................................................................................8 

Please read and store the instructions ..............................................................................8 
Explanation of symbols........................................................................................................8

Safety .......................................................................................................................9 

Correct use .............................................................................................................................9 
Safety instructions ................................................................................................................9

First use ...................................................................................................................14 

Check the car jack and the total content ......................................................................... 14 
General overview ............................................................................................................... 14 
Saddle assembling/dismantling ...................................................................................... 15

Assembling the car jack .........................................................................................15 

Fitting the carry handle ..................................................................................................... 15 
Assembling the jack handle .............................................................................................. 15 
Attaching the jack handle ................................................................................................. 15

Car jack use .............................................................................................................17 

Vehicle preparation .............................................................................................................17 
Car jack placement ..............................................................................................................17 
Vehicle lifting. ...................................................................................................................... 18 
Vehicle lowering ................................................................................................................. 19

Troubleshooting .................................................................................................... 20
Maintenance, repair and inspection ..................................................................... 22 

Adding oil ............................................................................................................................. 23 
Changing oil ........................................................................................................................24

Cleaning and storing ............................................................................................. 25
Technical details .................................................................................................... 26
Waste disposal ....................................................................................................... 26 

Disposal of the packaging .................................................................................................26 
Disposal of the car jack .......................................................................................................26

Declaration of conformity. ..................................................................................... 27

Summary of Contents for AutoXS FLX-WH-01













Reviews: